天津港“8·12”爆炸事件记录波形分析          下载免费PDF全文

王晨辰  张盛中  杨晓瑜  张冰  李世鑫  刘敏 《地震工程学报》2018,40(1):130-138

利用天津地震台网23个短周期地震仪记录到的2015年8月12日天津港爆炸事件波形数据,对事件进行初步分析和研究。分别使用能量包络线法和波形匹配法,共识别出4次爆炸事件,并结合波形互相关的主事件定位法对爆炸事件进行定位。分析结果表明:第一次爆炸发生的时间为2015年8月12日23时34分4秒,1.77s后发生了规模更大的二号爆炸事件;34.11s后又发生了最强的三号爆炸事件;86.33s再一次发生了能量较弱的四号爆炸事件,其中二号与三号爆炸事件相距65~70m,二号与四号事件相距160~170m。此外,通过选用爆破、矿塌、核爆和天然地震等不同类型事件的波形数据,从时间域和频率域分别对这些事件进行对比分析,发现其震相特征表现出明显差异。  相似文献   

Full moment tensor inversion constrained by double-couple focal mechanism for induced seismicity*          下载免费PDF全文

Yuyang Tan  Haijiang Zhang  Junlun Li  Chen Yin  Furong Wu 《地震科学（英文版）》2020,33(4):177-193

In this study, we propose a new method to determine full moment tensor solution for induced seismicity. This method generalizes the full waveform matching algorithm we have developed to determine the double-couple (DC) focal mechanism based on the neighbourhood algorithm. One major difference between the new method and the former one is that we adopt a new misfit function to constrain the candidate moment tensor solutions with respect to a reference DC solution in addition to other misfit terms characterizing the waveform matching. Through synthetic tests using a real passive seismic survey geometry, the results show the new constraint can help better recover the DC components of inverted moment tensors. We further investigate how errors in the velocity model and source location affect the moment tensor solution. The synthetic test results indicate that the constrained inversion is robust in recovering both the DC and non-DC components. We also test the proposed method on several real induced events in an oil/gas field in Oman using the same observation system as synthetic tests. While it is found that the full moment tensor solutions without using the DC constraints have much larger non-DC components than solutions with the DC constraints, both solutions are able to fit the observed waveforms at similar levels. The synthetic and real test results suggest the proposed DC constrained inversion method can reliably retrieve full moment tensor solutions for the induced seismicity.  相似文献   

2013年芦山地震震源区地壳介质地震波速变化的特征分析          下载免费PDF全文

王俊  郑定昌  张金川  詹小艳  钱婷 《地球物理学报》2020,63(2):517-531

为探究芦山M7.0级地震后5年多来，震源区龙门山断裂带西南段介质波速的变化规律，本文基于2012年4月至2018年4月共6年的连续波形数据，运用移动窗互谱与频域偏振等分析方法，结合背景噪声源的特性，对不同深度范围内的相对波速变化以及震后的恢复过程与机制进行了研究.获得的主要认识包括：（1）年尺度而言，震源区周期为1~20 s的背景噪声场相对稳定，但成分复杂、2~10 s频带内至少存在2个能量相对稳定的噪声源；不同周期噪声的能量，在月变与季节性上的变化特征差异明显.（2）获得了长时间尺度、不同频带内介质相对波速的背景变化水平，1~2 s、2~4 s的波动幅度（约为±0.04%）与季节性变化规律强于4~10 s、10~20 s的，结合与降雨量相关的地下水位模型能很好地解释其变化规律.（3）震源区的同震波速降低现象清晰，降幅约为0.08%~0.1%；空间上，波速下降最为显著的区域主要集中在龙门山断裂带两侧约70 km范围内，其中四川盆地一侧平均约为0.1%，略高于青藏高原（0.08%）一侧；在断裂带内的降速不显著.对不同子频带进行测量的结果显示，震后除10~20 s外，其余3个子频带的相对波速在震后较短时间内（约20天左右）均出现较大幅度的波速降低现象，其中4~10 s的平均降速最大（约为0.08%），分析认为主震及大量余震的松弛效应是引起介质波速下降的主要原因.（4）震后大约1年左右，波速变化基本恢复到震前水平，且至2018年4月前未观察到大幅的波速变化现象，总体上各频带内的结果均沿零线小幅波动.  相似文献   

逆时偏移在声反射成像测井中的应用方法研究          下载免费PDF全文

李雨生  李宁  武宏亮  王克文  冯周  刘鹏 《地球物理学报》2020,63(4):1705-1714

声反射成像测井中常用的基于射线理论的Kirchhoff积分偏移算法和基于单程波理论的F-K偏移算法均可实现井旁缝洞反射体的快速偏移成像,但其仅适用于地层垂向变化较弱的速度场和高陡角裂缝的偏移成像,无法实现低角度反射体的准确偏移归位,产生偏移假象误导测井解释.逆时偏移基于全波动方程,可适应强垂向变化速度场,实现近似水平反射体的偏移成像.本文详细分析了将逆时偏移应用于声反射成像测井时存在的数据准备、时间采样间隔匹配和成像条件改进等若干问题,通过设置多组理论模型来说明算法对井旁不同反射体的识别能力.模拟资料和实际资料处理结果证实,较F-K偏移算法,逆时偏移算法成像精度更高、收敛性更好,可有效实现近似水平构造偏移归位.改进的归一化互相关成像条件可解决深部地层的远井壁成像衰减问题,降低测井解释的多解性.逆时偏移将成为声反射成像测井高精度偏移技术的发展方向.  相似文献   

A New Retracking Technique for Brown Peaky Altimetric Waveforms     

Fukai Peng 《Marine Geodesy》2018,41(2):99-125

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).  相似文献   

2017年6月3日阿拉善左旗5.0级地震震源深度测定   总被引：1，自引：1，他引：0  

郝美仙  宋晓燕  徐岩  翟浩 《地震地磁观测与研究》2018,39(2):18-24

2017年6月3日18时11分内蒙古阿拉善左旗（37.99° N，103.56° E）发生5.0级地震，利用近震深度震相sPL测定法、CAP波形反演法、sPn与Pn震相走时差法，进行震源深度精确测定。研究结果表明，3种方法测得的该地震震源深度基本一致，分布范围为8.5—11 km，表明该地震发生在上地壳。  相似文献   

GEODETIC AND TELESEISMIC CONSTRAINTS ON SLIP DISTRIBUTION OF 2015 M_W6.4 PISHAN EARTHQUAKE          下载免费PDF全文

CHEN Yun-guo  HE Ping  DING Kai-hua  LI Shui-ping  WANG Qi 《地震地质》2019,41(1):137-149

On July 3^rd, 2015, a M_W6.4 earthquake occurred on Pishan County, Xinjiang, located in the front of western Kunlun thrust belt, which is the largest earthquake(M_W6.0~7.0)in the past 40 years in this region. In this study, we collected both the near-filed geodetic coseismic deformation observations including 4 GPS sites and one high-resolution ALOS-2 InSAR imagery, and far-field teleseismic P waveforms from 25 stations provided by IRIS/USGS, to invert the fault parameters(strike and dip)and coseismic rupture model of 2015 M_W6.4 Pishan earthquake. Using the finite fault theory, a non-linear simulated annealing algorithm was employed to resolve our joint inversion problem. The strike (120°~130°) and dip angle(35°~40°)of optimal models are different from that of some previous studies, and the dip change is strongly constrained by combined data than that of strike. In fixing the geometric parameters of optimal fault model, we also considered data weight(5)(geodetic data/teleseismic P waveforms)and constrained weight from moment and smooth factor(2.5). Clearly, our results indicate that the slip distribution mainly concentrates in the depth range from 9 to 16km and a length range of 20km along the strike direction, which is similar to the spatial distribution of the relocated aftershocks. The maximum slip is~95cm. The seismic moment release is 5.45×10¹⁸N·m, corresponding to M_W6.42. Compared with the single data set, geodetic data or teleseismic waveform, our joint inversion model could simultaneously constrain the seismic moment and slip distribution well, thus avoiding effectively a lower-resolution rupture distribution determined by teleseismic-only inversion and a bias released moment estimated by the geodetic-only inversion. Importantly, we should consider both the near-field geodetic data and far-field teleseismic data in retrieving the rupture model for accurately describing the seismogenic structure of active fault in western Kunlun region.  相似文献   

基于三维应变格林函数反演中小震震源机制          下载免费PDF全文

周立  林强  范涛 《地震工程学报》2019,41(6):1553-1559

随着复杂速度结构反演的发展和高性能计算能力的提升,基于高精度3D介质模型计算格林函数反演震源机制更具可行性。中小地震因具有更好的覆盖和近似点源效应,在区域结构成像中有着广泛的应用。基于波形类的反演方法如波动方程层析成像\,全波形反演都需要震源机制解,而传统的震源机制反演方法不能很好地应用于中小地震。采用有限差分法构建应变格林张量(Strain Green Tensor,SGT)数据库,将合成波形和实际波形按震相截窗并滤波到不同的频带范围,先通过最小化互相关走时差来进行震源重定位,再通过最小化波形残差反演震源机制。通过合成数据测试验证方法的正确性,随后将该方法应用于青藏高原东部边缘龙门山地区,反演一系列M_W3.4～5.7的中小地震震源机制。由于应变格林张量数据库可预先构建,该方法可以应用于(近)实时震源机制解反演。  相似文献   

Kelvin-Voigt黏弹性介质井孔声场有限差分数值模拟与波形特征     

岳崇旺  王祝文 《吉林大学学报(地球科学版)》2021,51(4):1268-1275

岩石介质具有黏滞性,黏弹性介质模型相对于弹性介质模型更为接近岩石介质的真实情况。根据Kelvin-Voigt黏弹性单元体模型本构关系,推导了柱坐标系下各向同性黏弹性介质时间域交错网格有限差分方程,进行了黏弹性介质井孔声场的数值模拟。模拟结果表明：品质因子和声源中心频率对黏弹性介质中的井内外声场均有影响：井外声场和井内声场的衰减均随品质因子的增大而减小,井外声波和井内反射波振幅随之增大;井外声场的衰减随声源中心频率的增大而减小,井外声波振幅随之增大,井内声场的衰减随声源中心频率的增大而增大,井内反射波振幅随之减小。  相似文献   

确定砂土动剪切模量和阻尼比的方法对比     

宋东松  冯震  金红山  孙逸涵 《吉林大学学报(地球科学版)》2021,51(5):1366-1380

确定土体动剪切模量的常用方法有规范法、Kumar法和自相关函数法,确定相应阻尼比的方法有规范法、Das and Luo法、Kokusho法、Kumar法和互相关函数法,为了分析不同方法所产生差异,实现定量化对比分析,笔者以福建标准砂（粒径为0.5~1.0 mm）为研究对象,采用不排水的应力控制动三轴试验,探讨不同的确定土体动剪切模量和阻尼比方法的差异性,并给出了不同土体条件建议选用的方法。结果表明：1）3种方法确定动剪切模量的结果有一定的差异,随剪应变的增大结果的差异逐渐增大,有效围压对结果的差异性有所影响,当剪应变为4×10^-3,有效围压为100 kPa时,3种方法差异显著,相对误差最大接近20%;2）而5种方法确定阻尼比的结果差异显著,随着剪应变的增大,5种方法确定的阻尼比相对误差大体上均在迅速减小,只有规范法在有效围压为100 kPa时,其相对误差有较小的增大趋势;5种方法中,Kumar法确定的阻尼比最接近平均阻尼比,互相关函数法远高于平均阻尼比,Das and Luo法和Kokusho法确定的阻尼比基本一致但低于平均阻尼比。建议以后的工程应用中,加载方式为应力控制时,可采用自相关函数法确定动剪切模量,采用Kumar法确定阻尼比,二者确定的动剪切模量和阻尼比均最接近平均值。  相似文献